The UniTorq "M" Series rack and pinion actuator offers the industries broadest line of pneumatic industrial valve and damper actuators on the market. Manufactured in 90º, 120º, 135º, 180º, 240º and 270º rotation, there are 16 sizes to choose from.

Double acting units start at 100in.lbs. And go up to 37,200in.lbs. Of output torque at 80 PSI. Fail safe, spring return models have output torque's of 17 to 15,600in.lbs. All units will operate from -10ºF. to 195ºF and from 20 PSIG to 150 PSIG input pressure.Optional high and low temp seals and bearings are available on all sizes.

All UniTorq actuators can be easily and safely field converted from double acting configuration to fail safe spring return configuration by inserting the correct number of patented spring cartridges to the double acting unit, eliminating bulky housing extensions, saving weight and space. Specially designed, preloaded self-contained spring cartridges are completely contained before end cap screws release, ensuring for the safest design of installation and removal.

The UniTorq "M" Series is an uncomplicated compact design. Internal porting eliminates the need for costly, external tubing. Accessory mounting is to NAMUR standards. The actuator drive side is to ISO 5211 dimensional standards. Solenoid mounting to NAMUR specifications is available, and is standard on all sizes .

The standard UniTorq actuator body is extruded, machined, hard anodized internally and externally, then polyester powder epoxy painted for maximum external and internal protection. UniTorq now offers ANI nickel impregnated bodies with stainless steel pinions and all stainless steel for maximum corrosion protection.

UniTorq pistons are die-cast aluminum and the Pinion is carbon steel, electroless nickel-plated. Both pistons incorporate a large Delrin 500 wear spring pad that significantly increases the actuator cycle life. Upper and lower Delrin 500 bushings minimize wear and increase actuator duty cycle. The standard DLS feature allows travel stop adjustment in both directions of travel.

The UniTorq "M" Series is available with a variety of accessories. Direct mount solenoids are available in NEMA 4, 7, and 9 in standard and special voltages. The new COM4 and COM7 Limit Switches are available in NEMA 4, 7, 9 with the innovative and patented Perry Indicator Positioners can be supplied to receive 3-15 PSI or 4-20 mA input control signals. Declutchable manual gear overrides are available for all size actuators.

Safe, compact, versatile, rugged, long lasting and economical. The UniTorq "M" Series is the best and only choice for your pneumatic rack and pinion actuation needs. Call or write for further information.