The H-200-I is used to isolate pulp stock consistency transmitters for repair. Special drilling on inlet flange allows valve to remain in position on the stock line while the transmitter is removed. Drilling on outlet flange corresponds to ANSI 150# standard. A beveled gate insures non-clogging shut-off and an optional resilient seat is available for tight shut-off.

Furnished with a narrow yoke and ratchet operator allowing valve to be installed without interference, however other operators are available. 3" size is standard, but other sizes are also available.

SIZE	FACE TO FACE	CENTERLINE TO TOP, CLOSED	CENTERLINE TO TOP, OPEN
3"	2"	19"	22"